Model Railway Forum

Model Railway Forum (http://www.modelrailwayforum.co.uk/index.php)
-   Scenery (http://www.modelrailwayforum.co.uk/forumdisplay.php?f=7)
-   -   Turntable (http://www.modelrailwayforum.co.uk/showthread.php?t=11726)

Seaside Station Master 17-04-2017 06:23 PM

Turntable
 
Hi Gents

Looking to fit a Peco turntable, what's the best way to cut the hole without using a router?

Have a normal jig saw and drill etc any suggestions?

Steve M 17-04-2017 06:34 PM

Go slowly with a jigsaw once you have carefully measured and drawn a circle. Just make sure there are no baseboard supports or wires where you want to cut.

Tinker 17-04-2017 06:59 PM

Jigsaw will work ok, i have one with a dust extractor fitting loads of sawdust with out one......as said check the under side for things you don't want cut, keep the cutout incase you change your mind easy to stick back in.....

Walkingthedog 17-04-2017 07:20 PM

Jigsaw. Mine has an attachment for cutting circles.

Flashbang 17-04-2017 07:28 PM

Jigsaw or a key hole saw if your into manual cutting!


All times are GMT +1. The time now is 04:35 AM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.