Model Railway Forum

Go Back   Model Railway Forum > Model Railway Construction > Track Layout & Design

Track Layout & Design Help with designing your track work


Reply
 
Thread Tools Display Modes
Old 13-03-2018, 11:40 PM   #1
Bucko
Goddard Junction
 
Bucko's Avatar
 

Join Date: May 2011
Location: Crewe
Posts: 54
Bucko is on a distinguished road
Default Glue or nail ?

hi guys just a quick question, can you get away with just nailing down the cork and track or is it better to glue the cork down first ?
Bucko is offline   Reply With Quote
Old 13-03-2018, 11:51 PM   #2
Tinker
Motive Power Supervisor
 

Join Date: Jan 2016
Location: N W Norfolk
Posts: 2,298
Tinker is on a distinguished road
Default

Its properly better not to use cork, just pin the track to the ply.....
Tinker is offline   Reply With Quote
Old 14-03-2018, 01:31 AM   #3
Mountain Goat
Unique Member.
 
Mountain Goat's Avatar
 

Join Date: Mar 2011
Location: UK.
Posts: 2,282
Mountain Goat is an unknown quantity at this point
Default

If using cork or another suitable material as a base, I would always try to glue it down. It does not need to be a strong glue. Wallpaper paste or something along those lines would be fine. (Always wash hands after using wallpaper paste as it contains a poison to stop insects eating wallpaper).
Once the base is glued down, then I would nail the track down. Some like to glue. I tend to nail as I know I can remove nails and make adjustments if needed.
Mountain Goat is offline   Reply With Quote
Old 14-03-2018, 07:17 AM   #4
davey
Member
 
davey's Avatar
 

Join Date: Jan 2018
Posts: 32
davey is on a distinguished road
Default

I have just completed the exercise myself and i used P.V.A , left the cork for a while to settle flat the a good dollop on pva and put into place, just used drawing pins where it curled up at the edges.
davey is offline   Reply With Quote
Old 14-03-2018, 08:24 AM   #5
Walkingthedog
Part time idiot
 
Walkingthedog's Avatar
 

Join Date: Aug 2013
Location: HAZLEMERE, Bucks
Posts: 10,032
Walkingthedog is on a distinguished road
Default

Pin the track straight to the board, no cork.

Having said that if you really want to use cork I would glue it down with PVA.
__________________
NURSE,the screens!

Last edited by Walkingthedog; 14-03-2018 at 08:46 AM.
Walkingthedog is online now   Reply With Quote
Old 14-03-2018, 09:59 AM   #6
ians
Talkative Member
 

Join Date: Dec 2011
Location: NE England -Washington
Posts: 156
ians is on a distinguished road
Default

I'm in the process of laying track. I'm using double sided tape to hold in place to start with as I've laid track 3 times already and changed the plan in my mind. The previous 3 were tacked using track pins, which I then had to remove. I'm hoping that double sided tape will be enough to hold the track in place but easy enough to allow the track to be lifted in a few weeks if I change my mind again!

I will eventually lay directly on the ply and either tack down without removing the tape (it has been cut back and isn't very noticeable) or can lift and remove the tape, probably the former as it is less work. If I leave it in place a little ballasting (never done it before) or a little paint will hide the tape.
ians is online now   Reply With Quote
Old 14-03-2018, 08:37 PM   #7
Michael P
Senior Member
 

Join Date: Jul 2016
Posts: 258
Michael P is on a distinguished road
Default

I use track pins and pin straight to ply. I use drawing pins across sleepers as a temporary measure and when satisfied, pin the track and take the drawing pins out.
Michael P is offline   Reply With Quote
Old 06-04-2018, 03:10 PM   #8
Bucko
Goddard Junction
 
Bucko's Avatar
 

Join Date: May 2011
Location: Crewe
Posts: 54
Bucko is on a distinguished road
Default

Thank for all the comments guys you were a great help lol still not sure which way to go. i think gluing the cork down and nailing the track down is the best but takes the longest.
Bucko is offline   Reply With Quote
Old 06-04-2018, 03:26 PM   #9
Walkingthedog
Part time idiot
 
Walkingthedog's Avatar
 

Join Date: Aug 2013
Location: HAZLEMERE, Bucks
Posts: 10,032
Walkingthedog is on a distinguished road
Default

Just take your time and donít rush things.
__________________
NURSE,the screens!
Walkingthedog is online now   Reply With Quote
Old 06-04-2018, 04:20 PM   #10
Bulleidboy
Senior Member
 
Bulleidboy's Avatar
 

Join Date: Jan 2012
Location: Basingstoke, Hants
Posts: 2,110
Bulleidboy is on a distinguished road
Default

I used self-adhesive cork. You can buy it to match any piece of Peco track - complete with holes for point rods etc.,
__________________
I always knew Iíd get old. How fast it happened was a bit of a surprise though.
Bulleidboy is offline   Reply With Quote
Reply

Bookmarks



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT +1. The time now is 09:54 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.